GetServingCellInfoVerbose

This command writes to the standard output GSM Cell information, in the format specific for GSM port, for the serving cell on the specified GSM port.

This command is only supported on QUECTEL modules.

COMMAND

Command	Line Arguments	Returns
GetServingCellInfoVerbose	PortIndex	Serving Cell Info in GSM module format

OUTPUT

Command output in the following format;

On GSM port, for 4G access technology:

"state,rat,is_tdd,mcc,mnc,cellid,pcid,earfcn,freq_band_ind,ul_bandwidth,dl_bandwidth,tac,rsrp,rsrq,rssi,sinr,srxlev\n
 %s,%s,%s,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\n"

On GSM port, for 3G access technology:

"state,rat,mcc,mnc,lac,cellid,uarfcn,psc,rac,rscp,ecio,phych,sf,slot,speech_code,commode\n
 %s,%s,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d\n"

EXAMPLE

~ # GetServingCellInfoVerbose 0
state,rat,mcc,mnc,lac,cellid,uarfcn,psc,rssi,rscp,ecno,srxqual,srxlev,drx,PhysCh,SF,slot,dchrscp,dchecno,voicecodec,ComMod
"NOCONN","3G",220,03,53FD,C2775,10638,67,-80,-80,23,13,34,64,-,-,-,-,-,"-",-

~ # SetAccessTechnology 0 GSM
OK

~ # GetServingCellInfoVerbose 0
state,rat,mcc,mnc,lac,cellid,bsic,arfcn,band,rxlev,txp,rla,drx,c1,c2,gprs,tch,ts,ta,maio,hsn,rxlevsub,rxlevfull, rxqualsub,rxqualfull,voicecodec
"NOCONN","2G",220,03,88C6,2775,30,56,0,-68,5,4,64,39,39,1,-,-,-,-,-,-,-,-,-,"-"

~ # GetServingCellInfoVerbose 1
state,rat,is_tdd,mcc,mnc,cellid,pcid,earfcn,freq_band_ind,ul_bandwidth,dl_bandwidth,tac,rsrp,rsrq,rssi,sinr,srxlev
"LIMSRV","LTE","FDD",220,05,1120D,305,6400,20,3,3,18,-109,-16,-76,-1,14

~ # GetServingCellInfoVerbose 1
state,rat,mcc,mnc,lac,cellid,uarfcn,psc,rac,rscp,ecio,phych,sf,slot,speech_code,comMod
"NOCONN","WCDMA",220,03,53FD,CC9A5,10688,67,1,-84,-14,-,-,-,-,-