GetNumberOfGsmAdapters: Difference between revisions

Revision as of 14:25, 10 September 2025

This command writes to the standard output information on active or on hold callon the specified GSM port.

By default the mode is unknown but it can be S_HR, S_FR and S_EFR.

COMMAND:

Command	Input Arguments	Returns
GetCallInfo	PortIndex	Call info (Call State, called number, calling number, mode)

OUTPUT

GSM port call information in the following format:

“%s %s %s %s\n%s %s %s %s\n”,call_state1, [called_number1, calling_number1, mode1],call_state2, [called_number2, calling_number2, mode2]

EXAMPLE

~# GetCallInfo 0
CONNECTED 0612345678 893301138325478569530 S_HR
IDLE

~# GetCallInfo 1
HOLD
IDLE

@@ Line 1: / Line 1: @@
-Test
+This command writes to the standard output information on active or on hold callon the specified GSM port.
+By default the mode is unknown but it can be S_HR, S_FR and S_EFR.
+'''COMMAND:'''
+{| class="wikitable"
+!Command
+!Input Arguments
+!Returns
+|-
+|'''GetCallInfo'''
+|PortIndex
+|Call info (Call State, called number, calling number, mode)
+|}
+'''OUTPUT'''
+GSM port call information in the following format:
+“%s %s %s %s\n%s %s %s %s\n”,call_state1, [called_number1, calling_number1, mode1],call_state2, [called_number2, calling_number2, mode2]
+'''EXAMPLE'''<syntaxhighlight lang="text">
+~# GetCallInfo 0
+CONNECTED 0612345678 893301138325478569530 S_HR
+IDLE
+~# GetCallInfo 1
+HOLD
+IDLE
+</syntaxhighlight>
+[[Category:R2D2]]
+[[Category:GENERAL]]