Administrator: added Category:VOLTE using HotCat

2025-04-02T10:09:27Z

← Older revision		Revision as of 10:09, 2 April 2025
Line 36:		Line 36:

	[[Category:R2D2]]		[[Category:R2D2]]
			[[Category:VOLTE]]

Administrator: added Category:R2D2 using HotCat

2025-04-02T10:09:12Z

added Category:R2D2 using HotCat

← Older revision		Revision as of 10:09, 2 April 2025
Line 34:		Line 34:

	</syntaxhighlight>		</syntaxhighlight>

			[[Category:R2D2]]

Administrator: Created page with "This command allows to set all VoLTE parameters for a dedicated port and restart the modem if it is mandatory. For voice call, the modem can be configured to either (CSFB, VOLTE or AUTO) : * accept the fallback in circuit switch (2G/3G), * force in VoLTE * automatic mode. IMS APN, UserName, Password, Authentication type and the PDP Type are optional parameters. The Authentication type can be NONE, PAP, CHAP or PAP_CHAP and the PDP type can take the value IPV4 or..."

2025-04-02T10:09:06Z

Created page with "This command allows to set all VoLTE parameters for a dedicated port and restart the modem if it is mandatory. For voice call, the modem can be configured to either (CSFB, VOLTE or AUTO) : * accept the fallback in circuit switch (2G/3G), * force in VoLTE * automatic mode. IMS APN, UserName, Password, Authentication type and the PDP Type are optional parameters. The Authentication type can be NONE, PAP, CHAP or PAP_CHAP and the PDP type can take the value IPV4 or..."

New page

This command allows to set all VoLTE parameters for a dedicated port and restart the modem if it is mandatory.

For voice call, the modem can be configured to either (CSFB, VOLTE or AUTO) :

* accept the fallback in circuit switch (2G/3G),
* force in VoLTE
* automatic mode.

IMS APN, UserName, Password, Authentication type and the PDP Type are optional parameters.

The Authentication type can be NONE, PAP, CHAP or PAP_CHAP and the PDP type can take the value IPV4 or IPV4V6.

The MBN profile (optional) can be set to AUTO or with the name of a MBN profile present in the module.

In this case, if the MBN profile is different than the current profile, the modem will be restarted.

'''COMMAND'''
{| class="wikitable"
!Command
!Line Arguments
!Returns
|-
|'''SetVolteParameters'''
|PortIndex, VolteMode, [ APN, UserName, Password, AuthType, PDPType, MbnProfile ]
|[[R2D2 Error Codes|Error Code]] in case of error.
|}
'''OUTPUT'''

Command status

'''EXAMPLE'''<syntaxhighlight lang="text">
~ # SetVolteParameters 1 VOLTE "" "" "" NONE IPV4 AUTO
SUCCESS

</syntaxhighlight>

SetVolteParameters - Revision history

Administrator: added Category:VOLTE using HotCat

Administrator: added Category:R2D2 using HotCat